9721-1029
9721-1029

EV Charging Station Test Adapter

SKU: 9721-1029
The UNIKS EV CHECK is a professional test adapter designed for inspection, verification, commissioning, and troubleshooting of AC electric vehicle charging stations (EVSE). The adapter simulates an electric vehicle connection, allowing technicians to safely verify charging station functionality and electrical safety without opening or modifying the charging equipment.
Equipped with an IEC 62196-2 Type 2 connector, EV CHECK enables simulation of various charging states through adjustable Control Pilot (CP) and Proximity Pilot (PP) signals. Users can simulate different cable ratings, vehicle states, charging requests, and fault conditions to verify correct charger operation and compliance with EV charging standards.
The adapter features dedicated measurement terminals for L1, L2, L3, N, and PE as well as a Schuko outlet for single-phase testing. When connected to installation testers such as the UNIKS RAPID PRO, NOVA, or NOVA PRO, technicians can perform insulation, loop impedance, RCD, voltage, and grounding tests directly on the charging installation.
Designed for field service and commissioning work, EV CHECK offers CAT III 600 V safety rating and IP54 protection, making it suitable for demanding electrical environments.
Key Benefits
  • Type 2 EV charging station test adapter
  • Simulates vehicle states and charging conditions
  • Adjustable CP and PP signal simulation
  • PE Pre-Test for protective conductor verification
  • CP fault and PE fault simulation
  • Compatible with installation testers and multifunction testers
  • Dedicated measurement terminals for three-phase testing
  • IP54-rated housing and CAT III 600 V safety category
Art nr Kabeldiameter Min Ø (mm) Kabeldiameter Max Ø (mm) Brottsgräns (kg)
9721-1029 — — —

Measurements and weight attributes

Width (mm): 250

Depth (mm): 115

Height (mm): 61

Weight (kg): 0.45

Pull line diameter Ø (mm):

Pull line längd (m):

Break point (kg):

Break load (kg):

Grip length (mm): 

Cable area max (mm2): 

Cable diameter min Ø (mm):

Cabler diameter max Ø (mm):

Max diameter Ø (mm):

Max load (kg):

Stored measurement (mm):

Drum diameter min internal Ø (mm):

Drum diameter max internal Ø (mm):

Drum diameter max external Ø (mm):

Service weight (kg):

Drum width max (mm):

Drum diameter min Ø (mm):

Drum diameter max Ø (mm):

Drum center hole min (mm):

Drum center hole max (mm):

Drum size Ø:

Total weight (kg):

Total length (mm):

Pressure max (kg):

Outer diameter ring max Ø (mm):

Attributes

ETIM-class:

Tullstat. nr:

Working temperature range: 0 - +40

Density:

Diameter (mm):

Distanse:

Pull speed max (m/min):

Pull force max (kp):

Pull line (typ):

Drive source: 

Duct:

Flow max (l/min): 

Frequency (kHz): 

Color: 

Thread: 

Grading: 

Force (kN):

Sound level dB (A):

Air flow (l/min):

Air pressure:

Material:

Motor:

pH value:

Reach in free air (m):

Stand (type):

Size:

Temperature range:

Elongation%:

Drum break:

Pressure max (bar):

Pressure speed max (m/min):

Viscosity (cP):